Site icon Temblor.net

San Andreas Fault Zone earthquake rattles Southern California

If you would like to protect your home from earthquakes, call QuakeQuotes – McClain Insurance Services at (425) 379-9200

By David Jacobson, Temblor

This morning’s M=4.5 earthquake struck just south of San Gorgonio Mountain in a portion of the San Andreas Fault Zone known as the “San Gorgonio knot.” (Photo from: summitpost.org)

 

Southern California woken by M=4.5 earthquake

At 4:49 a.m. local time a M=4.5 earthquake struck near the San Andreas Fault, approximately 100 km east of Los Angeles. This quake struck within the San Bernardino Mountains at a depth of 12.9 km. According to the USGS ShakeMap, strong shaking was recorded near the epicenter, and by 10:30 a.m. this morning, over 10,000 people had filled out felt reports on the USGS website. Fortunately, no damage or injuries have been reported, and they are unlikely due to the moderate magnitude of the quake.

This Temblor map shows the location of this morning’s M=4.5 earthquake within the San Andreas Fault Zone. As of 10:30 this morning, over 10,000 people had reported feeling the quake on the USGS webiste.

 

The San Andreas Fault Zone

Today’s earthquake struck in the San Andreas Fault Zone, within the San Bernardino Mountains section. The focal mechanism produced by the USGS shows that the quake was both right-lateral strike-slip and compressional in nature on a structure oriented almost purely east-west. While most people only think of the San Andreas Fault as a strike-slip structure, within this area, the story is much different. As the San Andreas weaves its way through Southern California, it has many bends separated by straight sections. While in the straight portions, like through the Mojave Desert, fault dips often exceed 80°, in the bends, subsurface magnetic data shows that in areas such as San Bernardino and Indio, the fault dips between 37°-65° to the northeast. This is a striking difference compared to the dip of the San Andreas within the western Traverse Range, where it dips approximately 55° to the southwest.

Due to these variable dips, at depth, the Southern San Andreas Fault has a shape described as a crude propeller (see figure below). Because of this variation, the fact that near North Palm Springs, the San Andreas Fault dips at 52° (today’s earthquake occurred on a structure dipping 68°), and because the San Andreas has a much different orientation to that of the structure on which today’s earthquake struck, it is unlikely today’s quake was on the main strand of the San Andreas. While the possibility cannot be ruled out, it was likely on one of the many other strands in the region.

These figures from Fuis et al., 2012 shows the propeller shape the San Andreas Fault has at depth. This variable dip was determined by magnetic imaging. Figure A shows the fault in plan view with the differing colors corresponding to depth. Figure B is a three-dimensional view of the fault looking to the northwest.

 

The many faults strands in this area has led seismologists to call this region the “San Gorgonio knot.” According to Dr. Lucy Jones, this is because many small faults intersect, and because the San Andreas is not clearly defined. The epicenter of today’s earthquake is also of note as it is just to the west of where a M=5.9 struck in 1986. That quake had a similar focal mechanism and occurred between the Mission Creek and Banning segments of the San Andreas Fault.

 

What could happen here?

Because of the tectonic setting of today’s earthquake, it should not be considered surprising. Such a magnitude is common in California, and according to Dr. Jones, this is the only portion of the Southern San Andreas that produces smaller quakes. Nonetheless, it is a reminder that we do live in earthquake country, and people should prepare themselves for what could happen. Using the Global Earthquake Activity Rate (GEAR) model, we can see what is expected to occur in our lifetime. This model, which is available in Temblor, uses global strain rates and the last 40 years of seismicity to forecast the likely earthquake magnitude in your lifetime anywhere on earth. In the figure below, the GEAR model shows that in the location of today’s earthquake, a M=6.9 is likely. Such an event would likely cause significant damage in Southern California, and highlights the need for education and preparedness.

This Temblor map shows the Global Earthquake Activity Rate (GEAR) model for much of California. This model uses global strain rates and the last 40 years of seismicity to forecast the likely earthquake magnitude in your lifetime anywhere on earth. This map shows that in the location of today’s earthquake, which also has an earthquake score of 92, the likely magnitude is M=6.75+. This highlights the seismic hazard of the region.

 

References
USGS

CalTech

Gary S. Fuis, Daniel S. Scheirer, Victoria E. Langenheim, and Monica D. Kohler, A New Perspective on the Geometry of the San Andreas Fault in Southern California and Its Relationship to Lithospheric Structure, Bulletin of the Seismological Society of America, Vol. 102, No. 1, pp. 236–251, February 2012, doi: 10.1785/0120110041

Wenzheng Yang, Egill Hauksson, and Peter M. Shearer, Computing a Large Refined Catalog of Focal Mechanisms for Southern California (1981–2010): Temporal Stability of the Style of Faulting, Bulletin of the Seismological Society of America, Vol. 102, No. 3, pp. 1179–1194, June 2012, doi: 10.1785/0120110311

LUCILE M. JONES, L. KATHERINE HUTTON, DOUGLAS D. GIVEN, AND CLARENCE R. ALLEN, THE NORTH PALM SPRINGS, CALIFORNIA, EARTHQUAKE SEQUENCE OF JULY 1986, Bulletin of the Seismological Society of America, Vol. 76, No. 6, pp. 1830-1837, December 1986

Lucy Jones Twitter Feed